• DN300耐油NBR橡膠避震“丁腈橡膠N41生產”

    來源:http://www.cjdou.com/ 作者:上海淞江集團 時間:2019-09-11 16:21
    淞江集團為液壓油管道提供耐油橡膠接頭產品,采用丁腈橡膠N41生產,其中含量就達到50%左右。
    The official website of Shanghai Meijiang Shock Absorber Group Co., Ltd. introduces the information of "NBR production" of DN300 oil-resistant rubber joints. Meijiang Group provides oil-resistant rubber joints for hydraulic oil pipelines, using NBR N41 production, the content of which is about 50%.

    【NBR】DN300耐油橡膠接頭“丁腈橡膠N41生產”









    說明:
    我公司耐高溫橡膠接頭閥體上刻有上海松夏字樣,松夏是上海淞江減震器集團有限公司旗下高端品牌,我公司所有特殊橡膠接頭閥體上都刻有上海松夏字樣(25kg、耐油、耐酸堿、耐高溫、耐磨、雙球、異徑),如果產品上沒有刻上海松夏字樣的產品不是特殊產品,閥體上刻有上海淞江減震器集團有限公司字樣的產品都是16kg過水產品,并非特殊產品。相關證明:松夏與淞江集團關系證明
    Explain:
    Our company's high-temperature rubber joint valve body engraved with Shanghai Songxia, Songxia is a high-end brand of Shanghai Songjiang Shock Absorber Group Co., Ltd. All our company's special rubber joint valve body engraved with Shanghai Songxia (25kg, oil, acid and alkali resistance, high temperature resistance, wear resistance, double ball, different diameter), if the product does not have The products engraved with Shanghai Songxia characters are not special products. The products engraved with Shanghai Songjiang Shock Absorber Group Co., Ltd. on the valve body are all 16KG aquatic products, not special products.

    名稱:耐油橡膠接頭
    型號:KXT-NBR-300
    口徑:DN300
    壓力:1.6Mpa
    長度:245mm
    軸向壓縮:25mm
    軸向拉伸:14mm
    橫向位移:15mm
    偏向角度:15°
    橡膠材質:丁腈橡膠N41
    法蘭材質:碳鋼 / 球墨QT450
    法蘭標準:GB/T 9119-2000 (除此法蘭標準之外,我廠還可以配套更多法蘭標準,如需了解其他法蘭標準請點擊:橡膠接頭法蘭標準
    適用介質:液壓油、潤滑油、乳化液;(注明:航空煤油、柴油、汽油,不能用,要選擇四氟橡膠接頭才可以使用。
    使用優點:減震、降噪、保護液壓設備的長期使用,降低維修成本。
    質保期限:12個月
    生產廠家:上海淞江減震器集團有限公司
    資質證書:合格證、質保書、檢驗報告、橡膠接頭行業TS壓力管道生產許可證、國家型式試驗報告、第三方性能檢測報告、含量成分檢測報告。
    Name: oil resistant rubber joint
    Model: KXT-NBR-300
    Caliber: DN300
    Pressure: 1.6Mpa
    Length: 245mm
    Axial compression: 25mm
    Axial tension: 14mm
    Lateral displacement: 15mm
    Deviation angle: 15 degrees.
    Rubber material: nitrile rubber N41
    Flange material: carbon steel / spheroidal graphite QT450
    Flange standard: GB/T 9119-2000
    Applicable media: hydraulic oil, lubricating oil, emulsion; (Note: aviation kerosene, diesel, gasoline, can not be used.)
    Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
    Warranty period: 12 months.
    Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
    Qualification Certificate: Qualification Certificate, Quality Guarantee, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.


    以下是淞江集團介紹:
    The following is the introduction of Songjiang group












    相關鏈接:橡膠接頭案例 
    Related links
    本文首發地址:http://www.cjdou.com/359.html
    男女摸下面舌吻刺激视频18禁